Call us at (775) 419-3476. No need to select a department, dial an extension or tell a machine why you’re calling. Call us, and we’ll help you. It’s that easy.
If the display on the transmitter’s front side is obstructed, you can rotate the transmitter at a 90° or 180° angle, so that the display is facing the user. To accomplish this, you’ll need to remove the four bolts (1) (refer to Figure 2.10) and carefully turn the transmitter (2) to the desired direction. Ensure that you securely tighten the bolts to maintain the transmitter’s seal. During the rotation process, it’s important to be cautious of the wiring to prevent any damages. It’s crucial not to rotate the transmitter more than 180 degrees to avoid any mishaps.
Figure 2.10 – Rotation of the transmitter
| CAUTION! |
| To avoid excessive twisting of wires inside the coriolis mass flow controller do not turn the transmitter at an angle over 180° from its initial position. |
