Call us at 775-419-3476. No need to select a department, dial an extension or tell a machine why you’re calling. Call us, and we’ll help you. It’s that easy.
$2,988.00
The ISM 5.0 Insertion Magmeter operates based on Faraday’s Law of electromagnetic induction: as flow velocity of a liquid increases through the magnetic field generated by the sensor head of the ISM flow meter, electrodes measure the voltage increase to calculate flow. … The voltage readings are sampled & averaged.
Insertion Magmeter for liquids, slurries shipping from stock & configured for you OEM OK.
EASY to use Insertion MAG Meters. Check our stock and prices that beats our competition.
Features LARGE LCD display, shows the Instantaneous Flow Rate, Total Flow, in user selectable units.
Where to get Power Supplies, Gaskets, Nuts and Bolts Link
Note: The following display orientations can be ordered so the user does not have to orient in the field.
The image below gives a guideline of the nominal maximum GPM for various pipe sizes
Consult factory for custom installation drawings for your Insertion MAG Meter requirements. 
Note: The image above allows one to determine the Hot Tap or Corp. Stop, Corporation Stop, requirements ad the 3.4" long "sensing region" can be retracted within the 7.0" long tube that is shown BELOW the Ball Valve in the above image. Frequently, customers utilize their own Ball Valve left behind from the Hot Tap or Corp. Stop rig that drilled into the "live" pipe. It is VERY important to note that the sensing point only needs to be inserted 1/8'th of the diameter into the flowing stream, IDEALLY, from the SIDE rather than the Top of Bottom as the Bottom is the least ideal location due to buildup. See the Fluid Mechanics video and paper BELOW explaining WHY this is true.
MAG Meter dimensions/ Installation requirements
Coriolis Mass Flow Meters from 3/8" to 10"
Higly Accurate flow meter for liquids, slurries, & oils. Accuracy of up to 0.1%. $5,300.00 – $24,750.00A Coriolis flow meter contains a tube which is energized by a fixed vibration. When a fluid (gas or liquid) passes through this tube the mass flow momentum will cause a change in the tube vibration, the tube will twist resulting in a phase shift. This phase shift can be measured & a linear output derived proportional to flow.
> view
2" NPT Modulating Control Ball Valve
$3,150.00
Grounding Ring SET for MAG Meters
These are made out of 0.090- 0.13 thick 316 or 304 Stainless Steel and are ONLY required when using $1.00 – $380.00
