Call us at (775) 419-3476. No need to select a department, dial an extension or tell a machine why you’re calling. Call us, and we’ll help you. It’s that easy.
$2,415.00 – $3,135.00
At our company, we offer cutting-edge solutions for natural gas and methane flow measurement. Our flow meters utilize a state-of-the-art MEMS thermal time-of-flight mass flow sensor, which is installed within a specially designed laminar flow channel. This channel ensures that laminar flow is maintained within the measurement area, providing highly accurate readings.
Unlike conventional thermal mass flow meters, our flow meters have minimal sensitivity to gas properties and flow conditions. This is achieved through our innovative use of micro pulses of thermal bursts of energy, which are measured using time-of-flight technology. When the system is “zeroed” in the desired gas, the measurements are completely independent of temperature or gas properties, ensuring reliable and precise readings every time.
With our advanced flow meters, you can be confident in the accuracy and reliability of your natural gas and methane flow measurements. Trust us to provide the solutions you need to optimize your operations and improve efficiency.READ MORE
Our Mass Flow Meter is unlike any other in the market, as it utilizes the time of flight of micro pulses of thermal bursts of energy to measure mass velocity. Unlike conventional thermal mass flow meters, which are sensitive to gas temperature and composition, our Mass Flow Meter is a pure “mass velocity” measuring machine that does not care about these factors. It is not necessary to calibrate our TFM-5700 series of Mass Flow Meters for specific gases, making them incredibly versatile and easy to use. Furthermore, our meters are not affected by rapid changes in gas temperature, making them ideal for use in a wide range of industrial applications. Our Mass Flow Meters are also incredibly fast and energy-efficient, requiring very little power to operate. So, if you’re looking for a reliable and efficient Mass Flow Meter, look no further than the TFM-5700 series.
Thermal mass flow meters for gases and air shipping from stock & configured for you OEM OK
EASY to use Low Flow Mass Flow Meters. Check our stock & prices that beats our competition
The TFM-5700 Methane Flow meter outputs mass flow rate, total and outputs 4-20 mA as well as ModBUS RTU.
| 1/2" NPT TMF5700 Flow Meter 0-20 SCFH, 0- 0.33 SCFM or 1/2" NPT TMF5700 Flow Meter 0-650 SCFH, 0- 10.8 SCFM 1" NPT TMF5700 Flow Meter 0-240 SCFH, 0- 41.2 SCFM or 1" NPT TMF5700 Flow Meter 0-2500 SCFH, 0- 41.6 SCFM2" NPT TMF5700 Flow Meter 0-3000 SCFH, 0- 50 SCFM or 2" NPT TMF5700 Flow Meter 0-6200 SCFH, 0- 103 SCFM |
Why is this an improvement over conventional Thermal Mass Flow Meters? Conventional thermal mass flow meters have sensitivity to the thermal properties of the gas as well as to the gas flow conditions. Our time of flight mass flow meter, utilizing the time of flight of micro pulses of thermal bursts of energy, has no sensitivity to temperature or gas properties when the system is "zeroed" in the desired gas.
It is a pure "mass velocity" measuring machine that does not care about gas temperature or composition. Consider conventional thermal mass flow meters you may have used in the past that have to be calibrated for the specific gas and do not do well when the temperature of the gas changes rapidly.
The TFM-5700 series of Mass Flow Meters has no such sensitivity. As well, these meters are blazing fast compared to conventional thermal mass flow meters, and they take VERY VERY VERY little power to run.
Note: Our thermal mass flow meters are an improvement to most "top brand" flow meters on the market, we invite you to investigate them.
1/2" to 12" MAG Flow Meter
Flow meters for liquids. Accuracy of ± 0.5% $2,112.00 – $10,450.00Electromagnetic flow meters, also called mag meters or magnetic meters, are volumetric flow meters which do not have any moving parts to wear, reducing the need for maintenance or replacement. Accuracy over a wide flow range can be as good as ± 0.5% of flow rate or better.
> view
Coriolis Mass Flow Meters from 3/8" to 10"
Higly Accurate flow meter for liquids, slurries, & oils. Accuracy of up to 0.1%. $4,500.00A Coriolis flow meter contains a tube which is energized by a fixed vibration. When a fluid (gas or liquid) passes through this tube the mass flow momentum will cause a change in the tube vibration, the tube will twist resulting in a phase shift. This phase shift can be measured & a linear output derived proportional to flow.
> view
2" NPT Modulating Control Ball Valve
$3,465.00
