Call us at 775-419-3476. No need to select a department, dial an extension or tell a machine why you’re calling. Call us, and we’ll help you. It’s that easy.
$1,995.00 – $2,595.00
Our natural gas and methane Flow meters feature our proprietary MEMS thermal time-of-flight mass flow sensor installed in a laminar flow channel that forms a boundary layer ensuring laminar flow exists in the desired measurement area. Conventional thermal mass flow meters have sensitivity to the thermal properties of the gas as well as to the gas flow conditions. Our time of flight mass flow meter, utilizing the time of flight of micro pulses of thermal bursts of energy, has no sensitivity to temperature or gas properties when the system is “zeroed” in the desired gas… READ MORE
Thermal mass flow meters for gases and air shipping from stock & configured for you OEM OK
EASY to use Low Flow Mass Flow Meters. Check our stock & prices that beats our competition
The TFM-5700 Methane Flow meter outputs mass flow rate, total and outputs 4-20 mA as well as ModBUS RTU.
| 1/2" NPT TMF5700 Flow Meter 0-20 SCFH, 0- 0.33 SCFM or 1/2" NPT TMF5700 Flow Meter 0-650 SCFH, 0- 10.8 SCFM 1" NPT TMF5700 Flow Meter 0-240 SCFH, 0- 41.2 SCFM or 1" NPT TMF5700 Flow Meter 0-2500 SCFH, 0- 41.6 SCFM2" NPT TMF5700 Flow Meter 0-3000 SCFH, 0- 50 SCFM or 2" NPT TMF5700 Flow Meter 0-6200 SCFH, 0- 103 SCFM |
Why is this an improvement over conventional Thermal Mass Flow Meters? Conventional thermal mass flow meters have sensitivity to the thermal properties of the gas as well as to the gas flow conditions. Our time of flight mass flow meter, utilizing the time of flight of micro pulses of thermal bursts of energy, has no sensitivity to temperature or gas properties when the system is "zeroed" in the desired gas.
It is a pure "mass velocity" measuring machine that does not care about gas temperature or composition. Consider conventional thermal mass flow meters you may have used in the past that have to be calibrated for the specific gas and do not do well when the temperature of the gas changes rapidly.
The TFM-5700 series of Mass Flow Meters has no such sensitivity. As well, these meters are blazing fast compared to conventional thermal mass flow meters, and they take VERY VERY VERY little power to run.
Note: Our thermal mass flow meters are an improvement to most "top brand" flow meters on the market, we invite you to investigate them.
1" Thermal Mass Flow Controller
The thermal Mass Flow Meter or Controller is capable of providing direct measurement of mass flow $3,995.00 – $4,195.00The thermal Mass Flow Meter or Controller is capable of providing direct measurement of mass flow, as opposed to most other methods that measure volumetric flow & require separate measurements for temperature & pressure in order to calculate density &, ultimately, the mass flow.
> view
100 SCCM to 100 SLPM Low Flow Tactical Flow Meter, Battery Powered for 2 years
Low Flow Gas Mass flow meters for methane $800.00Find your medical gas flow meter easily amongst the 209 products from the ... Oxygen or Air 0 – 15 L/min st&ard flow rate Low flow, 0 – 3.5 & 0 – 5 ... PRODUCT DETAILS The TSI Mass Flow Meter 41401 (0.01-20 L/min / Air ... a centralized medical gas pipeline system, to the patient with the use of a mask or a cannula.
> view
Ultrasonic Liquid Flow Meter with Thermal Energy/BTU Capability
Ultrasonic flowmeters use sound waves to determine the velocity of a fluid flowing in a pipe $2,400.00 – $2,475.00Ultrasonic flowmeters use sound waves to determine the velocity of a fluid flowing in a pipe. At no flow conditions, the frequencies of an ultrasonic wave transmitted into a pipe & its reflections from the fluid are the same.
> view
