$1.00 – $380.00
These are made out of 0.090- 0.13 thick 316 or 304 Stainless Steel and are ONLY required when using a MAG Meter in a system with Non Conductive pipes, such as PVC, ABS, CPVC and the like.
The size of the grounding rings should always match the meter size for installation with inline meters. Standard grounding rings are for use with ANSI Class 150 flanges. If you have a 1″ ANSI Flange Tactical Flow Meter you will order the 1″ Grounding ring set.
Grounding rings can significantly reduces electrical noise and may be necessary for proper operation of electromagnetic flow meters installed in lined or non-conductive pipes… READ MORE
Turbine Flow Meter
Designed for for liquids, diesel, and oil $1,230.00A turbine flow meter is used for volumetric total flow &/or flow rate measurement & has a relatively simple working principle. As fluid flows through the turbine meter, it impinges upon turbine blades that are free to rotate about an axis along the center line of the turbine housing. The angular (rotational) velocity of the turbine rotor is directly proportional to th
> view1" Thermal Mass Flow Controller
The thermal Mass Flow Meter or Controller is capable of providing direct measurement of mass flow $3,995.00 – $4,195.00The thermal Mass Flow Meter or Controller is capable of providing direct measurement of mass flow, as opposed to most other methods that measure volumetric flow & require separate measurements for temperature & pressure in order to calculate density &, ultimately, the mass flow.
> viewUltrasonic Liquid Flow Meter with Thermal Energy/BTU Capability
Ultrasonic flowmeters use sound waves to determine the velocity of a fluid flowing in a pipe $2,400.00 – $2,475.00Ultrasonic flowmeters use sound waves to determine the velocity of a fluid flowing in a pipe. At no flow conditions, the frequencies of an ultrasonic wave transmitted into a pipe & its reflections from the fluid are the same.
> view