All models with junction box Ambient temperature: +104 °F (+40 °C) maximum
Coriolis gas flow meters parameters are marked on the name plates attached to to the body of the sensor and the top side of the transmitter. Coriolis gas flow meter has the following name plates:
The main name plate is produced according to Figure 1.4 and contains data presented in Table 1.11.
Coriolis mass flow controller’s parameters are marked on the name plates attached to the top side of the transmitter and to the body of the sensor. Coriolis mass flow controller has the following name plates:
The main name plate is produced according to Figure 1.4 and contains data presented in Table 1.11.
Item # | Description |
1 | Trademark, TacticalFlowMeter.com badge |
2 | Coriolis mass flow meter name |
3 | approval marks |
4 | Maximum process pressure (maximum) |
5 | Accuracy |
6 | Model |
7 | Power supply voltage |
8 | IP protection grade |
9 | Explosion protection level and Ex-sign |
10 | Tactical Flow Meter Info |
11 | Serial number |
12 | Flow Cal( K factor) |
13 | Temperature range of the measured medium |
14 | Full flow range (Q) |
15 | Meter size |
16 | CE directive |
CAUTION! |
Before installation of the coriolis mass flow meter, make sure that the information on the name plates conforms to the specifications in your order. |
After verification procedure the coriolis mass flow meter is sealed. Sealing is performed using the seal and wire threaded through the holes in the front cover of the transmitter.
It’s also allowed to use a sealing tape attached to both the transmitter shell and the front cover of the transmitter.